In the world of industrial valves, trunnion mounted ball valves have become a popular choice for a variety of applications. Designed to handle high pressure and high temperature environments, these valves are ideal for industries such as oil and gas, petrochemicals and power generation. In this b...
Valves suitable for medium temperature -40℃~-196℃ are called low temperature valves, and such valves generally use long-necked bonnets.
The long-neck bonnet is used to stipulate that the cryogenic valve includes cryogenic emergency shut-off valve, cryogenic globe valve, cryogenic check valve, LN...
Galvanized Plating
Zinc is relatively stable in dry air and is not easy to change color. In water and humid atmosphere, it reacts with oxygen or carbon dioxide to form oxide or alkaline zinc carbonate film, which can prevent zinc from continuing to be oxidized and play a protective role.
Zinc is ...
Corrosion is one of the important elements that cause valve damage. In valve protection, valve corrosion protection is an important issue to consider. For metal valves, surface coating treatment is the best cost-effective protection method.
1. Shielding
After the metal surface is coated with pain...
When brown rust spots (spots) appear on the surface of stainless steel pipes, people are greatly surprised: “Stainless steel does not rust, and if it rusts, it is not stainless steel, and there may be a problem with the steel.” In fact, this is a one-sided misconception about the lack...
Corrosion is one of the important elements that cause valve damage. In valve protection, valve corrosion protection is an important issue to consider. For metal valves, surface coating treatment is the best cost-effective protection method.
1. Shielding
After the metal surface is coated with pain...
Metal heat treatment is one of the important processes in mechanical manufacturing. Compared with other processing processes, heat treatment generally does not change the shape and overall chemical composition of the workpiece, but changes the microstructure inside the workpiece or the chemical c...
Introduction
This article contains all the information you need to know about 1000 PSI Ball Valve
Read further and learn more about:
1.What is ball valve ?
2.Type of 1000 PSI ball valve
3.Material of 1000 PSI Ball Valve
4.Parts and structure of 1000 PSI Ball Valve ...
ANSI B16.104-197
Leakage
Class
Maximum allowable leakage
Test Medium
Test Pressure
Ⅱ
0.5%Cv
10~52℃
Air or Water
Max Working Pressure Difference △P
Or 501b/in2 Difference Pressure,
Choose Lower One
Ⅲ
0.1%Cv
10~52℃
Air or Water
Max Working Pressure Difference△P
Or 50...
1. Why there is a flange cracks after welding
In the production of container equipment, when the stainless steel flange and the cylinder are welded, there will be cracks in the neck of the flange, not at the welding seam. What's the matter? Why is there such a situation?...
Electrochemical corrosion corrodes metals in various forms. It not only acts between two metals, but also produces a potential difference due to the poor solubility of the solution, the poor solubility of oxygen, and the slight difference in the internal structure of the...
Gaskets are a very common spare part of equipment.
Factory gasket, have you installed it correctly?
If installed incorrectly, the gasket may be damaged during equipment operation and may even be dangerous.
What tools are required for installation?
Prepare the following e...